Abstract

The purpose of the proposed package milr is to analyze multiple-instance data. Ordinary multiple-instance data consists of many independent bags, and each bag is composed of several instances. The statuses of bags and instances are binary. Moreover, the statuses of instances are not observed, whereas the statuses of bags are observed. The functions in this package are applicable for analyzing multiple-instance data, simulating data via logistic regression, and selecting important covariates in the regression model. To this end, maximum likelihood estimation with an expectation-maximization algorithm is implemented for model estimation, and a lasso penalty added to the likelihood function is applied for variable selection. Additionally, an milr object is applicable to generic functions fitted, predict and summary. Simulated data and a real example are given to demonstrate the features of this package.

1 Introduction

Multiple-instance learning (MIL) is used to model the class labels which are associated with bags of observations instead of the individual observations. This technique has been widely used in solving many different real-world problems. In the early stage of the MIL application, Dietterich, Lathrop, and Lozano-Pérez (1997) studied the drug-activity prediction problem. A molecule is classified as a good drug if it is able to bind strongly to a binding site on the target molecule. The problem is: one molecule can adopt multiple shapes called the conformations and only one or a few conformations can bind the target molecule well. They described a molecule by a bag of its many possible conformations whose binding strength remains unknown. An important application of MIL is the image and text categorization, such as in Maron and Ratan (1998), Andrews, Tsochantaridis, and Hofmann (2003), Zhang et al. (2007), Zhou, Sun, and Li (2009), Li et al. (2011), Kotzias et al. (2015), to name a few. An image (bag) possessing at least one particular pattern (instance) is categorized into one class; otherwise, it is categorized into another class. For example, Maron and Ratan (1998) treated the natural scene images as bags, and, each bag is categorized as the scene of waterfall if at least one of its subimages is the waterfall. Whereas, Zhou, Sun, and Li (2009) studied the categorization of collections (bags) of posts (instances) from different newsgroups corpus. A collection is a positive bag if it contains 3% posts from a target corpus category and the remaining 97% posts, as well as all posts in the negative bags, belong to the other corpus categories. MIL is also used in medical researches. The UCSB breast cancer study (Kandemir, Zhang, and A. (2014)) is such a case. Patients (bags) were diagnosed as having or not having cancer by doctors; however, the computer, initially, had no knowledge of which patterns (instances) were associated with the disease. Furthermore, in manufacturing processes (Chen et al. (2016)), a product (bag) is defective as long as one or more of its components (instances) are defective. In practice, at the initial stage, we only know that a product is defective, and we have no idea which component is responsible for the defect.

Several approaches have been offered to analyze datasets with multiple instances, e.g., Maron (1998), Ray and Craven (2005), Xu and Frank (2004), Zhang and Goldman (2002). From our point of view, the statuses of these components are missing variables, and thus, the Expectation-Maximization (EM) algorithm (Dempster, Laird, and Rubin (1977)) can play a role in multiple-instance learning. By now the toolboxes or libraries available for implementing MIL methods are developed by other computer softwares. For example, Yang (2008) and Tax and Cheplygina (2016) are implemented in MATLAB software, but neither of them carries the methods based on logistic regression model. Settles, Craven, and Ray (2008) provided the Java codes including the method introduced in Ray and Craven (2005). Thus, for R users, we are first to develop a MIL-related package based on logistic regression modelling which is called multiple-instance logistic regression (MILR). In this package, we first apply the logistic regression defined in Ray and Craven (2005) and Xu and Frank (2004), and then, we use the EM algorithm to obtain maximum likelihood estimates of the regression coefficients. In addition, the popular lasso penalty (Tibshirani (1996)) is applied to the likelihood function so that parameter estimation and variable selection can be performed simultaneously. This feature is especially desirable when the number of covariates is relatively large.

To fix ideas, we firstly define the notations and introduce the construction of the likelihood function. Suppose that the dataset consists of $n$ bags and that there are $m_i$ instances in the $i$th bag for $i=1,\dots, n$. Let $Z_i$ denote the status of the $i$th bag, and let $Y_{ij}$ be the status of the $j$th instance in the $i$th bag along with $x_{ij} \in \Re^p$ as the corresponding covariates. We assume that the $Y_{ij}$ follow independent Bernoulli distributions with defect rates of $p_{ij}$, where $p_{ij}=g\left(\beta_0+x_{ij}^T\beta\right)$ and $g(x) = 1/\left(1+e^{-x}\right)$. We also assume that the $Z_i$ follow independent Bernoulli distributions with defect rates of $\pi_i$. Therefore, the bag-level likelihood function is

\[\begin{equation}\label{eq:L} L\left(\beta_0,\beta\right)=\prod_{i=1}^n\pi_i^{z_i}\left(1-\pi_i\right)^{1-z_i}. \end{equation}\]

To associate the bag-level defect rate $\pi_i$ with the instance-level defect rates $p_{ij}$, several methods have been proposed. The bag-level status is defined as $Z_i=I\left(\sum_{j=1}^{m_i}Y_{ij}>0\right)$. If the independence assumption among the $Y_{ij}$ holds, the bag-level defect rate is $\pi_i=1-\prod_{j=1}^{m_i}(1-p_{ij})$. On the other hand, if the independence assumption might not be held, Xu and Frank (2004) and Ray and Craven (2005) proposed the softmax function to associate $\pi_i$ to $p_{ij}$, as follows:

\[\begin{equation}\label{eq:softmax} s_i\left(\alpha\right)=\sum_{j=1}^{m_i}p_{ij}\exp{\left\{\alpha p_{ij}\right\}} \Big/ \sum_{j=1}^{m_i}\exp{\left\{\alpha p_{ij}\right\}}, \end{equation}\]

where $\alpha$ is a pre-specified nonnegative value. Xu and Frank (2004) used $\alpha=0$, therein modeling $\pi_i$ by taking the average of $p_{ij}$, $j=1,\ldots,m_i$, whereas Ray and Craven (2005) suggested $\alpha=3$. We observe that the likelihood () applying neither the $\pi_i$ function nor the $s_i(\alpha)$ function results in effective estimators.

Below, we begin by establishing the E-steps and M-steps required for the EM algorithm and then attach the lasso penalty for the estimation and feature selection. Several computation strategies applied are the same as those addressed in Friedman, Hastie, and Tibshirani (2010). Finally, we demonstrate the functions provided in the milr package via simulations and on a real dataset.

2 The multiple-instance logistic regression

2.1 EM algorithm

If the instance-level statuses, $y_{ij}$, are observable, the complete data likelihood is \[\prod_{i=1}^n\prod_{j=1}^{m_i}p_{ij}^{y_{ij}}q_{ij}^{1-y_{ij}}~,\] where $q_{ij}=1-p_{ij}$. An ordinary approach, such as the Newton method, can be used to solve this maximal likelihood estimate (MLE). However, considering multiple-instance data, we can only observe the statuses of the bags, $Z_i=I\left(\sum_{j=1}^{m_j}Y_{ij}>0\right)$, and not the statuses of the instances $Y_{ij}$. As a result, we apply the EM algorithm to obtain the MLEs of the parameters by treating the instance-level labels as the missing data.

In the E-step, two conditional distributions of the missing data given the bag-level statuses $Z_i$ are \[Pr\left(Y_{i1}=0,\ldots,Y_{im_i}=0\mid Z_i=0\right)=1\] and \[ Pr\left(Y_{ij}=y_{ij}, \quad j=1,\dots, m_i \mid Z_i=1\right) = \frac{ \prod_{j=1}^{m_i}p_{ij}^{y_{ij}}q_{ij}^{1-y_{ij}}\times I\left(\sum_{j=1}^{m_i}y_{ij}>0\right) }{1-\prod_{l=1}^{m_i}q_{il}}. \] Thus, the conditional expectations are

\[\begin{equation*} E\left(Y_{ij}\mid Z_i=0\right)=0 \quad \mbox{ and } \quad E\left(Y_{ij}\mid Z_i=1\right)=\frac{p_{ij}}{1-\prod_{l=1}^{m_i}q_{il}}\equiv\gamma_{ij}. \end{equation*}\]

The $Q$ function at step $t$ is $Q\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right) = \sum_{i=1}^nQ_i\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right)$, where $Q_i$ is the conditional expectation of the complete log-likelihood for the $i$th bag given $Z_i$, which is defined as

\[\begin{align*} Q_i\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right) & = E\left(\sum_{j=1}^{m_i}y_{ij}\log{\left(p_{ij}\right)}+\left(1-y_{ij}\right)\log{\left(q_{ij}\right)} ~\Bigg|~ Z_i=z_i,\beta_0^t,\beta^t\right) \\ & = \sum_{j=1}^{m_i}z_i\gamma_{ij}^t\left(\beta_0+x_{ij}^T\beta\right)-\log{\left(1+e^{\beta_0+x_{ij}^T\beta}\right)}. \end{align*}\]

Note that all the $p_{ij}$, $q_{ij}$, and $\gamma_{ij}$ are functions of $\beta_0$ and $\beta$, and thus, we define these functions by substituting $\beta_0$ and $\beta$ by their current estimates $\beta_0^t$ and $\beta^t$ to obtain $p_{ij}^t$, $q_{ij}^t$, and $\gamma_{ij}^t$, respectively.

In the M-step, we maximize this $Q$ function with respect to $\left(\beta_0, \beta\right)$. Since the maximization of the nonlinear $Q$ function is computationally expensive, following Friedman, Hastie, and Tibshirani (2010), the quadratic approximation to $Q$ is applied. Taking the second-order Taylor expansion about $\beta_0^t$ and $\beta^t$, we have $Q\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right) =Q_Q\left(\beta_0,\beta\mid \beta_0^t,\beta^t\right) + C + R_2\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right)$, where $C$ is a constant in terms of $\beta_0$ and $\beta$, $R_2\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right)$ is the remainder term of the expansion and \[ Q_Q\left(\beta_0,\beta\mid \beta_0^t,\beta^t\right) = -\frac{1}{2}\sum_{i=1}^n\sum_{j=1}^{m_i}w_{ij}^t\left[u_{ij}^t-\beta_0-x_{ij}^T\beta\right]^2, \] where $u_{ij}^t=\beta_0+x_{ij}^T\beta^t+\left(z_i\gamma^t_{ij}-p_{ij}^t\right)\Big/\left(p_{ij}^tq_{ij}^t\right)$ and $w_{ij}^t=p_{ij}^tq_{ij}^t$. In the milr package, instead of maximizing $Q\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right)$, we maximize its quadratic approximation, $Q_Q\left(\beta_0,\beta\mid\beta_0^t,\beta^t\right)$. Since the objective function is quadratic, the roots of $\partial Q_Q / \partial \beta_0$ and $\partial Q_Q / \partial \beta$ have closed-form representations.

2.2 Variable selection with lasso penalty

We adopt the lasso method (Tibshirani (1996)) to identify active features in this MILR framework. The key is to add the $L_1$ penalty into the objective function in the M-step so that the EM algorithm is capable of performing estimation and variable selection simultaneously. To this end, we rewrite the objective function as

\[\begin{equation}\label{eq:lasso} \underset{\beta_0,\beta}{\min}\left\{-Q_Q\left(\beta_0,\beta\mid \beta_0^t,\beta^t\right)+\lambda\sum_{k=1}^p\left|\beta_k\right|\right\}. \end{equation}\]

Note that the intercept term $\beta_0$ is always kept in the model; thus, we do not place a penalty on $\beta_0$. In addition, $\lambda$ is the tuning parameter, and we will introduce how to determine this parameter later. We applied the shooting algorithm (Fu (1998), milr_paper) to update $\left(\beta^t_0,\beta^t\right)$.

3 Implementation

The milr package contains a data generator, DGP, which is used to generate the multiple-instance data for the simulation studies, and two estimation approaches, milr and softmax, which are the main tools for modeling the multiple-instance data. In this section, we introduce the usage and default setups of these

3.1 Data generator

The function DGP is the generator for the multiple-instance-type data under the MILR framework.

To use the DGP function, the user needs to specify an integer n as the number of bags, a vector m of length $n$ as the number of instances in each bag, and a vector beta of length $p$, with the desired number of covariates, and the regression coefficients, $\beta$, as in DGP(n, m, beta). Note that one can set m as an integer for generating the data with an equal instance size m for each bag. Thus, the total number of observations is $N=\sum_{i=1}^n m_i$. The DGP simulates the labels of bags through the following steps:

3.2 The milr and softmax apporaches

In the milr package, we provide two approaches to model the multiple-instance data: the proposed milr (Chen et al. (2016)) and the softmax approach (Xu and Frank (2004)). To implement these two approaches, we assume that the number of observations and covariates are $N$ and $p$, respectively. The input data for both milr and softmax are separated into three parts: the bag-level statuses, y, as a vector of length $N$; the $N\times p$ design matrix, x; and bag, the vector of indices of length $N$, representing the indices of the bag to which each instance belongs.

milr(y, x, bag, lambda, numLambda, lambdaCriterion, nfold, maxit)
softmax(y, x, bag, alpha, ...)

For the milr function, specifying lambda in different ways controls whether and how the lasso penalty participates in parameter estimation. The default value of lambda is $0$. With this value, the ordinary MLE is applied, i.e., no penalty term is considered. This is the suggested choice when the number of covariates $p$ is small. When $p$ is large or when variable selection is desired, users can specify a $\lambda$ vector of length $\kappa$; otherwise, by letting lambda = -1, the program automatically provides a $\lambda$ vector of length $\kappa=$numLambda as the tuning set. Following Friedman, Hastie, and Tibshirani (2010), the theoretical maximal value of $\lambda$ in () is

\[\begin{equation*}\label{eq:lammax} \lambda_{max}=\left[\prod_{i=1}^n\left(m_i-1\right)\right]^{\frac{1}{2}}\left[\prod_{i=1}^nm_i^{1-2z_i}\right]^{\frac{1}{2}}. \end{equation*}\]

The automatically specified sequence of $\lambda$ values ranges from $\lambda_{min}=\lambda_{max}/1000$ to $\lambda_{max}$ in ascending order.

The default setting for choosing the optimal $\lambda$ among these $\lambda$ values is the Bayesian information criterion (BIC), $-2\log{(likelihood)} + p^*\times\log{(n)}$, where $p^*$ is the number of nonzero regression coefficients. Alternatively, the user can use the options lambdaCriterion = "deviance" and nfold = K with an integer K to obtain the best $\lambda$ that minimizes the predictive deviance through ‘bag-wise’ K-fold cross validation. The last option, maxit, indicates the maximal number of iterations of the EM algorithm; its default value is 500.

For the softmax function, the option alpha is a nonnegative real number for the $\alpha$ value in (). The maximum likelihood estimators of the regression coefficients are obtained by the generic function optim. Note that no variable selection approach is implemented for this method.

Two generic accessory functions, coef and fitted, can be used to extract the regression coefficients and the fitted bag-level labels returned by milr and softmax. We also provide the significance test based on Wald’s test for the milr estimations without the lasso penalty through the summary function. In addition, to predict the bag-level statuses for the new data set, the predict function can be used by assigning three items: object is the fitted model obtained by milr or softmax, newdata is the covariate matrix, and bag\_newdata is the bag indices of the new dataset. Finally, the MIL model can be used to predict the bag-level labels and the instances-level labels. The option type in fitted and predicted functions controls the type of output labels. The default option is type = "bag" which results the bag-level prediction. Otherwise, by setting type = "instance", the instances-level labels will be presented.

fitted(object, type)
predict(object, newdata, bag_newdata, type)

4 Examples

We illustrate the usage of the milr package via simulated and real examples.

4.1 Estimation and variable selection

We demonstrate how to apply the milr function for model estimation and variable selection. We simulate data with $n=30$ bags, each containing $m=3$ instances and regression coefficients $\beta = (-2, -1, 1, 2, 0.5, 0, 0, 0, 0, 0)$. Specifically, the first four covariates are important.

library(milr)
library(pipeR)
set.seed(99)
# set the size of dataset
numOfBag <- 30
numOfInstsInBag <- 3
# set true coefficients: beta_0, beta_1, beta_2, beta_3
trueCoefs <- c(-2, -1, 2, 0.5)
trainData <- DGP(numOfBag, numOfInstsInBag, trueCoefs)
colnames(trainData$X) <- paste0("X", 1:ncol(trainData$X))
(instanceResponse <- as.numeric(with(trainData, tapply(Z, ID, any))))

##  [1] 0 1 0 1 0 1 1 1 0 0 1 1 1 0 1 0 1 1 0 0 1 0 1 1 0 1 1 1 1 1

Since the number of covariates is small, we then use the milr function to estimate the model parameters with lambda = 0. One can apply summary to produce results including estimates of the regression coefficients and their corresponding standard error, testing statistics and the P-values under Wald’s test. The regression coefficients are returned by the function coef.

# fit milr model
milrFit_EST <- milr(trainData$Z, trainData$X, trainData$ID, lambda = 1e-7)

## Use the user-defined lambda vector.

# call the Wald test result
summary(milrFit_EST)

## Log-Likelihood: -15.550.

## Chosen Penalty: 0.000.

## Estimates:

##           Estimate
## intercept  -1.4016
## X1          1.4028
## X2          0.3787
## X3          1.0886

# call the regression coefficients
coef(milrFit_EST)

##  intercept         X1         X2         X3 
## -1.4015728  1.4027912  0.3787156  1.0886233

The generic function table builds a contingency table of the counts for comparing the true bag-level statuses and the fitted bag-level statuses (obtained by the option type = "bag") and the predict function is used to predict the labels of each bag with corresponding covariate $X$. On the other hand, The fitted and predicted instance-level statuses can also be found by setting type = "instance" in the fitted and predict functions.

fitted(milrFit_EST, type = "bag")

##  [1] 1 0 1 1 0 0 1 1 1 0 1 0 1 0 0 0 1 1 0 1 1 0 1 1 1 1 0 1 1 1

# fitted(milrFit_EST, type = "instance") # instance-level fitted labels
table(DATA = instanceResponse, FITTED = fitted(milrFit_EST, type = "bag"))

##     FITTED
## DATA  0  1
##    0  6  5
##    1  5 14

# predict for testing data
testData <- DGP(numOfBag, numOfInstsInBag, trueCoefs)
colnames(testData$X) <- paste0("X", 1:ncol(testData$X))
(instanceResponseTest <- as.numeric(with(trainData, tapply(Z, ID, any))))

##  [1] 0 1 0 1 0 1 1 1 0 0 1 1 1 0 1 0 1 1 0 0 1 0 1 1 0 1 1 1 1 1

pred_EST <- with(testData, predict(milrFit_EST, X, ID, type = "bag"))
# predict(milrFit_EST, testData$X, testData$ID, 
#         type = "instance") # instance-level prediction
table(DATA = instanceResponseTest, PRED = pred_EST)

##     PRED
## DATA  0  1
##    0  4  7
##    1  7 12

Next, the $n < p$ cases are considered. We generate a data set with $n=30$ bags, each with 3 instances and $p=45$ covariates. Among these covariates, only the first five of them, $X_1,\ldots,X_5$, are active and their nonzero coefficients are the same as the previous example. First, we manually specify 20 $\lambda$ values manually from 0.01 to 20 The milr function chooses the best tuning parameter which results in the smallest BIC. For this dataset, the chosen model is a constant model.

set.seed(99)
# Set the new coefficienct vector (large p)
trueCoefs_Lp <- c(-2, -2, -1, 1, 2, 0.5, rep(0, 45))
# Generate the new training data with large p
trainData_Lp <- DGP(numOfBag, numOfInstsInBag, trueCoefs_Lp)
colnames(trainData_Lp$X) <- paste0("X", 1:ncol(trainData_Lp$X))
# variable selection by user-defined tuning set
lambdaSet <- exp(seq(log(0.01), log(20), length = 20))
milrFit_VS <- with(trainData_Lp, milr(Z, X, ID, lambda = lambdaSet))
# grep the active factors and their corresponding coefficients
coef(milrFit_VS) %>>% `[`(abs(.) > 0)

##  intercept 
## -0.7056211

Second, we try the auto-tuning feature implemented in milr by assigning lambda = -1. The total number of tuning $\lambda$ values is indicated by setting nlambda. The following example shows the result of the best model chosen among 5 $\lambda$ values. The slice $lambda shows the auto-tuned $\lambda$ candidates and the slice $BIC returns the corresponding value of BIC for every candidate $\lambda$ value. Again, the chosen model is a constant model.

# variable selection using auto-tuning
milrFit_auto_VS <- milr(trainData_Lp$Z, trainData_Lp$X, trainData_Lp$ID,
                        lambda = -1, numLambda = 5) 
# the auto-selected lambda values
milrFit_auto_VS$lambda

## [1]  0.04516636  0.25398910  1.42828569  8.03184065 45.16635916

# the values of BIC under each lambda value
milrFit_auto_VS$BIC

## [1] 109.27500  66.61280  49.09209  40.05306  40.05306

# grep the active factors and their corresponding coefficients
coef(milrFit_auto_VS) %>>% `[`(abs(.) > 0)

##  intercept 
## -0.7056231

Instead of using BIC, a better way to choose the proper $\lambda$ is using the cross validation by setting lambdaCriterion = "deviance". The following example shows the best model chosen by minimizing the predictive deviance via ‘bag-wise’ 3-fold cross validation. The results of the predictive deviance for every candidate $\lambda$ can be found in the slice $cv. Twenty-nine covariates were identified including the first four true active covariates, $X_1,\ldots,X_4$.

# variable selection using auto-tuning with cross validation
milrFit_auto_CV <- milr(trainData_Lp$Z, trainData_Lp$X, trainData_Lp$ID,
                        lambda = -1, numLambda = 5, 
                        lambdaCriterion = "deviance", nfold = 3) 
# the values of predictive deviance under each lambda value
milrFit_auto_CV$cv

## [1] 16.07815 17.03320 13.58422 12.21729 12.21729

# grep the active factors and their corresponding coefficients
coef(milrFit_auto_CV) %>>% `[`(abs(.) > 0)

##  intercept 
## -0.7056231

According to another simulation study which is not shown in this paper, in contrast to cross-validation, BIC does not perform well for variable selection in terms of multiple-instance logistic regressions. However, it can be an alternative when performing cross-validation is too time consuming.

4.2 Real case study

Hereafter, we denote the proposed method with the lasso penalty by MILR-LASSO for brevity. In the following, we demonstrate the usage of MILR-LASSO and the softmax approach on a real dataset, called MUSK1. The MUSK1 data set consists of 92 molecules (bags) of which 47 are classified as having a musky smell and 45 are classified to be non-musks. The molecules are musky if at least one of their conformers (instances) were responsible for the musky smell. However, knowledge about which conformers are responsible for the musky smell is unknown. There are 166 features that describe the shape, or conformation, of the molecules. The goal is to predict whether a new molecules is musk or non-musk. This dataset is one of the popular benchmark datasets in the field of multiple-instance learning research and one can download the dataset from the following weblink.

dataName <- "MIL-Data-2002-Musk-Corel-Trec9.tgz"
dataUrl <- "http://www.cs.columbia.edu/~andrews/mil/data/"

Here are the codes that use the untar function to decompress the downloaded file and extract the MUSK1 dataset. Then, with the following data preprocessing, we reassemble the MUSK1 dataset in a "data.frame" format. The first 2 columns of the MUSK1 dataset are the bag indices and the bag-level labels of each observation. Starting with the third column, there are $p=166$ covariates involved in the MUSK1 dataset.

filePath <- file.path(getwd(), dataName)
# Download MIL data sets from the url (not run)
# if (!file.exists(filePath))
#  download.file(paste0(dataUrl, dataName), filePath)
# Extract MUSK1 data file (not run)
# if (!dir.exists("MilData"))
#   untar(filePath, files = "musk1norm.svm")
# Read and Preprocess MUSK1
library(data.table)
MUSK1 <- fread("musk1norm.svm", header = FALSE) %>>%
  `[`(j = lapply(.SD, function(x) gsub("\\d+:(.*)", "\\1", x))) %>>%
  `[`(j = c("bag", "label") := tstrsplit(V1, ":")) %>>%
  `[`(j = V1 := NULL) %>>% `[`(j = lapply(.SD, as.numeric)) %>>%
  `[`(j = `:=`(bag = bag + 1, label = (label + 1)/2)) %>>%
  setnames(paste0("V", 2:(ncol(.)-1)), paste0("V", 1:(ncol(.)-2))) %>>%
  `[`(j = paste0("V", 1:(ncol(.)-2)) := lapply(.SD, scale), 
       .SDcols = paste0("V", 1:(ncol(.)-2)))
X <- paste0("V", 1:(ncol(MUSK1) - 2), collapse = "+") %>>% 
  (paste("~", .)) %>>% as.formula %>>% model.matrix(MUSK1) %>>% `[`( , -1L)
Y <- as.numeric(with(MUSK1, tapply(label, bag, function(x) sum(x) > 0)))

To fit an MIL model without variable selection, the milr package provides two functions. The first is the milr function with lambda = 0. The second approach is the softmax function with a specific value of alpha. Here, we apply the approaches that have been introduced in Xu and Frank (2004) and Ray and Craven (2005), called the $s(0)$ (alpha=0) and $s(3)$ (alpha=3) methods, respectively. The optimization method in softmax is chosen as the default settings of the generic function optim, that is, the method.

# softmax with alpha = 0
softmaxFit_0 <- softmax(MUSK1$label, X, MUSK1$bag, alpha = 0, 
                        control = list(maxit = 5000))
# softmax with alpha = 3
softmaxFit_3 <- softmax(MUSK1$label, X, MUSK1$bag, alpha = 3, 
                        control = list(maxit = 5000))
# use a very small lambda so that milr do the estimation 
# without evaluating the Hessian matrix
milrFit <- milr(MUSK1$label, X, MUSK1$bag, lambda = 1e-7, maxit = 5000)

For variable selection, we apply the MILR-LASSO approach. First, the tuning parameter set is chosen automatically by setting $\lambda = -1$, and the best $\lambda$ value is obtained by minimizing the predictive deviance with 3-fold cross validation among nlambda = 20 candidates.

# MILR-LASSO
milrSV <- milr(MUSK1$label, X, MUSK1$bag, lambda = -1, numLambda = 20, 
               nfold = 3, lambdaCriterion = "deviance", maxit = 5000)
# show the detected active covariates
sv_ind <- names(which(coef(milrSV)[-1L] != 0)) %>>% 
  (~ print(.)) %>>% match(colnames(X))

##  [1] "V31"  "V36"  "V37"  "V76"  "V83"  "V105" "V106" "V108" "V109" "V116"
## [11] "V118" "V124" "V126" "V129" "V136" "V147" "V162" "V163"

# use a very small lambda so that milr do the estimation 
# without evaluating the Hessian matrix
milrREFit <- milr(MUSK1$label, X[ , sv_ind], MUSK1$bag, 
                  lambda = 1e-7, maxit = 5000)
# Confusion matrix of the fitted model
table(DATA = Y, FIT_MILR = fitted(milrREFit, type = "bag"))

##     FIT_MILR
## DATA  0  1
##    0 39  6
##    1  3 44

We use 3-fold cross validation and compare the prediction accuracy among four MIL models which are $s(0)$, $s(3)$, the MILR model with all covariates, and, the MILR model fitted by the selected covariates via MILR-LASSO. Then, we show their prediction accuracy by the confusion matrices.

set.seed(99)
predY <- matrix(0, length(Y), 4L) %>>%
  `colnames<-`(c("s0","s3","milr","milr_sv"))
folds <- 3
foldBag <- rep(1:folds, floor(length(Y) / folds) + 1, 
               length = length(Y)) %>>% sample(length(.))
foldIns <- rep(foldBag, table(MUSK1$bag))
for (i in 1:folds) {
  # prepare training and testing sets
  ind <- which(foldIns == i)
  # train models
  fit_s0 <- softmax(MUSK1[-ind, ]$label, X[-ind, ], MUSK1[-ind, ]$bag,
                    alpha = 0, control = list(maxit = 5000))
  fit_s3 <- softmax(MUSK1[-ind, ]$label, X[-ind, ], MUSK1[-ind, ]$bag,
                    alpha = 3, control = list(maxit = 5000))
  # milr, use a very small lambda so that milr do the estimation
  #       without evaluating the Hessian matrix
  fit_milr <- milr(MUSK1[-ind, ]$label, X[-ind, ], MUSK1[-ind, ]$bag,
                   lambda = 1e-7, maxit = 5000)
  fit_milr_sv <- milr(MUSK1[-ind, ]$label, X[-ind, sv_ind], MUSK1[-ind, ]$bag,
                      lambda = 1e-7, maxit = 5000)
  # store the predicted labels
  ind2 <- which(foldBag == i)
  # predict function returns bag response in default
  predY[ind2, 1L] <- predict(fit_s0, X[ind, ], MUSK1[ind, ]$bag)
  predY[ind2, 2L] <- predict(fit_s3, X[ind, ], MUSK1[ind, ]$bag)
  predY[ind2, 3L] <- predict(fit_milr, X[ind, ], MUSK1[ind, ]$bag)
  predY[ind2, 4L] <- predict(fit_milr_sv, X[ind, sv_ind], MUSK1[ind, ]$bag)
}

table(DATA = Y, PRED_s0 = predY[ , 1L])

##     PRED_s0
## DATA  0  1
##    0 30 15
##    1  4 43

table(DATA = Y, PRED_s3 = predY[ , 2L])

##     PRED_s3
## DATA  0  1
##    0 26 19
##    1  2 45

table(DATA = Y, PRED_MILR = predY[ , 3L])

##     PRED_MILR
## DATA  0  1
##    0 31 14
##    1 10 37

table(DATA = Y, PRED_MILR_SV = predY[ , 4L])

##     PRED_MILR_SV
## DATA  0  1
##    0 34 11
##    1  8 39

milr: Multiple-Instance Logistic Regression with Lasso Penalty

Ping-Yang Chen

Ching-Chuan Chen

Chun-Hao Yang

Sheng-Mao Chang

Kuo-Jung Lee

2020-10-28