FENCE_AGENT(8)

NAME
fence_ilo - Fence agent for HP iLO

fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

fence_ilo2 is a Power Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.

The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. The agent can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

-o, --action=[action]
    Fencing action (Default Value: reboot)

-a, --ip=[ip]
    IP address or hostname of fencing device

-u, --ipport=[port]
    TCP/UDP port to use for connection with device (Default Value: 443)

-t, --notls
    Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.

-p, --password=[password]
    Login password or passphrase

-S, --password-script=[script]
    Script to run to retrieve password

-n, --plug=[ip]
    IP address or hostname of fencing device (together with --port-as-ip)

-r, --ribcl-version=[version]
    Force ribcl version to use

-z, --ssl
    Use SSL connection with verifying certificate (Default Value: 1)

--ssl-insecure
    Use SSL connection without verifying certificate

--ssl-secure
    Use SSL connection with verifying certificate

--tls1.0
    Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up.

-l, --username=[name]
    Login name This parameter is always required.

-q, --quiet
    Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

-v, --verbose
    Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

--verbose-level
    Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

-D, --debug-file=[debugfile]
    Write debug information to given file

-V, --version
    Display version information and exit

-h, --help
    Display help and exit

--plug-separator=[char]
    Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

--delay=[seconds]
    Wait X seconds before fencing is started (Default Value: 0)

--disable-timeout=[true/false]
    Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

--login-timeout=[seconds]
    Wait X seconds for cmd prompt after login (Default Value: 10)

--port-as-ip
    Make "port/plug" to be an alias to IP address

--power-timeout=[seconds]
    Test X seconds for status change after ON/OFF (Default Value: 20)

--power-wait=[seconds]
    Wait X seconds after issuing ON/OFF (Default Value: 0)

--shell-timeout=[seconds]
    Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--stonith-status-sleep=[seconds]
    Sleep X seconds between status calls during a STONITH action (Default Value: 1)

--retry-on=[attempts]
    Count of attempts to retry power on (Default Value: 3)

--gnutlscli-path=[path]
    Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

on  Power on machine.

off Power off machine.

reboot
    Reboot machine.

status
    This returns the status of the plug/virtual machine.

monitor
    Check the health of fence device

metadata
    Display the XML metadata describing this resource.

manpage
     The operational behavior of this is not known.

validate-all
    Validate if all required parameters are entered.

STDIN PARAMETERS

action
    Fencing action (Default Value: reboot)

ip  IP address or hostname of fencing device Obsoletes: ipaddr

ipport
    TCP/UDP port to use for connection with device (Default Value: 443)

notls
    Disable TLS negotiation and force SSL3.0. This should only be used for devices that do not support TLS1.0 and up.

password
    Login password or passphrase Obsoletes: passwd

password_script
    Script to run to retrieve password Obsoletes: passwd_script

plug
    IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port

ribcl_version
    Force ribcl version to use Obsoletes: ribcl

ssl Use SSL connection with verifying certificate (Default Value: 1)

ssl_insecure
    Use SSL connection without verifying certificate

ssl_secure
    Use SSL connection with verifying certificate

tls1.0
    Disable TLS negotiation and force TLS1.0. This should only be used for devices that do not support TLS1.1 and up.

username
    Login name This parameter is always required. Obsoletes: login

quiet
    Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

verbose
    Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.

verbose_level
    Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).

debug_file
    Write debug information to given file Obsoletes: debug

version
    Display version information and exit

help
    Display help and exit

plug_separator
    Separator for plug parameter when specifying more than 1 plug (Default Value: ,)

delay
    Wait X seconds before fencing is started (Default Value: 0)

disable_timeout
    Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

login_timeout
    Wait X seconds for cmd prompt after login (Default Value: 10)

port_as_ip
    Make "port/plug" to be an alias to IP address

power_timeout
    Test X seconds for status change after ON/OFF (Default Value: 20)

power_wait
    Wait X seconds after issuing ON/OFF (Default Value: 0)

shell_timeout
    Wait X seconds for cmd prompt after issuing command (Default Value: 3)

stonith_status_sleep
    Sleep X seconds between status calls during a STONITH action (Default Value: 1)

retry_on
    Count of attempts to retry power on (Default Value: 3)

gnutlscli_path
    Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)